雕塑再我們生活中很多地方都可以見到，仔細觀察，我們會發現，很多的雕塑多多少少都會有一些被破壞的現象，那么被破壞的雕塑都如何處理呢?下面
山東浮雕雕塑廠家為您講解：
Sculpture can be seen in many places in our life. When we observe it carefully, we will find that many sculptures are more or less damaged. How to deal with the damaged sculptures? Next, Shandong relief sculpture manufacturer will explain to you:
1、銹斑：制作前或制作過程中有時會看到不銹鋼產品或設備上生銹，這說明表面受到嚴重污染。設備投入使用前必須把銹掉，徹底清理過的表面應通過鐵試驗和/或水試驗進行檢驗。
1. Rust spots: Rust on stainless steel products or equipment can sometimes be seen before or during production, which indicates that the surface is seriously polluted. Rust must be removed before the equipment is put into use, and the thoroughly cleaned surface shall be inspected by iron test and/or water test.
2、焊接缺陷：焊接缺陷如：咬邊、未焊透、密集氣孔和裂紋不僅降低接頭的牢固性，而且還會成為縫隙腐蝕的腐蝕源。改善這種結果進行清理操作時，它們還會夾帶固體顆粒。這些缺陷可通過重新焊接或修磨后重焊進行修補。
2. Welding defects: welding defects such as undercut, incomplete penetration, dense pores and cracks not only reduce the firmness of the joint, but also become the corrosion source of crevice corrosion. When cleaning operation is carried out to improve this result, they will also carry solid particles. These defects can be repaired by re-welding or re-welding after grinding.
3、油和油脂：有機物質如油，油脂甚指印都會成為局部腐蝕的腐蝕源。由于這些物質能起屏障作用，它們會影響化學和電化學清理效果，因而必須徹底清理掉。
3. Oil and grease: Organic substances such as oil, grease and even fingerprints can become the corrosion source of local corrosion. Because these substances can act as a barrier, they will affect the chemical and electrochemical cleaning effect, so they must be thoroughly cleaned.
4、油漆、粉筆和標記筆印：這些污染物的影響與油和油脂的影響相似。建議用干凈的刷子和干凈的水或堿性清洗劑進行洗滌，也可以使用高壓水或蒸汽沖洗。
4. Paint, chalk and marker printing: The impact of these pollutants is similar to that of oil and grease. It is recommended to wash with a clean brush and clean water or alkaline detergent, or wash with high-pressure water or steam.
如果雕塑破損比較嚴重比如發生折斷、大塊缺料等，需要和雕塑生產廠家聯系，向廠家征求維修方案，根據廠家提供的維修方案進行維修。
If the sculpture is seriously damaged, such as broken, large pieces of missing materials, etc., you need to contact the sculpture manufacturer, ask the manufacturer for a maintenance plan, and repair according to the maintenance plan provided by the manufacturer.
破損嚴重的可能需要使用電焊機、激光切割機等進行修改，使用多種手段對雕塑進行修復。修復完成之后要對雕塑進行打磨、噴漆等后續的保養防護處理，以免雕塑再次發生損壞。
The seriously damaged sculptures may need to be modified by electric welding machines, laser cutting machines, etc., and repaired by various means. After the repair, the sculpture should be polished, painted and other subsequent maintenance and protection treatment to prevent the sculpture from being damaged again.
When maintaining large sculptures, professional operators are also required to operate them. Good maintenance can improve the service life of sculptures. Come to our website for more relevant content http://www.luxuryofwatches.cn consulting service
