浮雕實際上是附著在物體表面的雕塑。它是雕塑與繪畫相結合的產物，在建筑中多見。如果你了解浮雕是什么，那我們就來說說浮雕的具體制作過程。這里山東浮雕雕塑廠家將其分為三種（三種材質）：
Relief is actually a sculpture attached to the surface of an object. It is the product of the combination of sculpture and painting, which is common in architecture. If you know what relief is, let's talk about the specific production process of relief. Here we divide it into three kinds (three materials):
一種：玻璃鋼浮雕
One kind: glass fiber reinforced plastic relief
制作玻璃鋼浮雕前，先制作1:1泥漿，然后在泥漿的基礎上重新制作石膏模具，并進行精細打磨，再在此基礎上復制玻璃鋼浮雕產品。石膏模具。復制成品玻璃鋼浮雕后，應打磨玻璃鋼浮雕表面，并根據圖稿進行局部著色。拋光、上色后安裝。
Before making FRP relief, first make 1:1 slurry, then re make gypsum mold on the basis of slurry, and carry out fine grinding, and then copy FRP relief products on this basis. Plaster mold. After copying the finished FRP relief, the surface of the FRP relief shall be polished and partially colored according to the drawings. Install after polishing and coloring.
二種：鍛銅浮雕
Two kinds: Wrought copper relief
制作鍛銅浮雕，先要制作1：1的泥漿，然后在泥漿的基礎上制作玻璃鋼鍛模。成品采用鍛銅浮雕，然后根據藝術品對鍛銅浮雕表面進行拋光和局部著色，后只剩下安裝。
To make wrought copper relief, first make 1:1 slurry, and then make FRP forging die on the basis of slurry. The finished product is made of forged copper relief, and then the surface of the forged copper relief is polished and partially colored according to the artwork, leaving only installation.
三種：石浮雕
Three kinds: Stone Relief
在制作石材浮雕前，要選擇與藝術品和設計要求相匹配的石材，并檢查色差，然后將羊毛材料制成板，鋸成尺寸材料，并檢查接縫，然后按藝術品1.:1做了一個大草稿。放好雕刻大圖后，再進行石材大面積雕刻，再由技師精細雕刻。
Before making the stone relief, we should select the stone that matches the art and design requirements, check the color difference, then make the wool material into a board, saw it into size materials, and check the joints, and then make a large draft according to art 1.: 1. After placing the large engraving drawing, large-scale engraving of stone will be carried out, and then the technician will carefully engrave it.
接下來，拋光雕刻全部完成后，用粗金剛砂布和細金剛砂布對細節進行處理和拋光。然后是成品的驗收。驗收完成后，須確定安裝尺寸，制作鋼骨架，后進行浮雕整體安裝，然后由技術人員進行局部處理，安裝驗收。
Next, after the polishing and carving are completed, the details are processed and polished with coarse emery cloth and fine emery cloth. Then is the acceptance of finished products. After the completion of acceptance, the installation size must be determined, the steel framework must be made, and then the overall installation of relief must be carried out, and then the local treatment and installation acceptance shall be carried out by professional technicians.
The specific production process of relief is divided into three types: glass fiber reinforced plastic relief, wrought copper relief and stone relief. Of course, no matter which relief form it is, it should follow the relevant correct methods when operating. For more information, please pay attention to our website http://www.luxuryofwatches.cn OK.
