說到山
東GRC構件這個術語，大多數人應該是感到挺茫然，畢竟我們在生活中沒接觸過，但有些人會在工作中有所接觸，下面為了更好的使用該產品，我們就先來了解山東GRC構件的相關基礎內容吧！
When it comes to the term Shandong GRC component, most people should feel quite at a loss, after all, we have no contact in life, but some people will have contact at work, in order to better use the product, we will first understand the relevant basic content of Shandong GRC component!
經過不斷的研究和自主開發，通過嚴格的工廠生產質量控制和嚴謹的生產安裝工藝，GRC構件可以替代當今市場上大部分的常規建筑裝飾材料。簡單來說，與大眾接觸較多的鋼筋混凝土相比，可以理解為用耐堿玻璃纖維代替鋼筋，在構件中起到抗拉、抗彎的作用。
After continuous research and independent development, through strict factory production quality control and rigorous production and installation process, GRC components can replace most of the conventional building decoration materials on the market today. In simple terms, compared with the public contact more reinforced concrete, can be understood as the use of alkali resistant glass fiber instead of steel, in the component play the role of tensile, bending resistance.
由于玻璃纖維的高拉伸性能、細線徑和柔軟的質量，在GRC構件的生產中具有良好的合規性。因此，成品GRC構件具有足夠的強度，可以滿足10~15mm厚度的常規要求。
Due to the high tensile properties, fine wire diameter and soft quality of glass fiber, it has good compliance in the production of GRC components. As a result, the finished GRC members are strong enough to meet the conventional requirements of 10 to 15mm thickness.
GRC構件的制造工藝，尤其是機器噴涂工藝，決定了GRC構件的物理性能優于鋼筋混凝土或石材等建筑裝飾材料。先將以水泥、沙子、水和外加劑為主要原料的混合砂漿充分攪拌，在檢驗合格的模具表面用機器混合耐堿玻璃纖維，然后用高壓力。
The manufacturing process of GRC components, especially the machine spraying process, determines that the physical properties of GRC components are better than reinforced concrete or stone and other architectural decoration materials. First, the mixed mortar with cement, sand, water and admixture as the main raw materials is fully mixed, on the surface of the mold inspected by the machine mixed alkali resistant glass fiber, and then high pressure.
推出耐堿玻璃纖維。連續長絲在噴槍中切割成標準短纖維，與砂漿混合物充分混合，射出的耐堿玻璃纖維短纖維在砂漿中縱橫交錯。
Alkali resistant glass fiber is introduced. Continuous filaments are cut into standard staple fibers in an airbrush and fully mixed with the mortar mixture, in which the alkali-resistant fiberglass staple fibers are shot crisscrossed.
